The SiSTELLAR® MAXI enables mounting heights of 10 to 16 metres, thus illuminating especially wide areas, and as a lighting system enables wide luminaire spacing. In addition each luminaire can be individually adapted to the specific requirements in this lighting field. This is achieved by the special construction of the lamp compartment, having space for up to six lamps. These are fitted on their own supports with socket, electrical connection and reflector bowl. By rotating this reflector system in steps of 30 to 150 degrees various characteristic light distributions can be achieved.

• large-area luminaire for high mounting heights
• central supporting frame for mast mounting
• lamp compartment with all-round wool-felt seal with active breathing properties
• weather-resistant via coated surface
• SiVARIAL lighting technology for individually settable light distribution, can be preset by the manufacturer
• electrical gear clearly arranged
• diverse lamp variations available
• railway approval

Housing and central canopy element of sheet aluminium with dripping edge, metallic grey textured (RAL 9007) surface; central mounting frame for central mast connection of steel, coated light grey (RAL 7035) | all-round wool-felt gasket | 3-part segmented cover of flat, temperature-resistant, toughened safety glass | insulation class: I or II | protection rating: IP44

Luminaire wired ready for connection | with 4-pole connection terminal (version with insulation class I: additionally with PE connection), max. 2.5mm² | lamps configured in 3 switching groups (version with reducing circuit: 2 switching groups) | electrical control components on central mounting frame, access from above via central canopy element | power reduction: U_St= 230V --> 100% luminous flux; U_St= 0V --> 50% luminous flux (with start in power reduction mode: 100% mode initially for approx. 6mins.) | tool-free relamping

SiVARIAL reflector units with lamp sockets can be individually rotated on-site in 15° steps | individual, application-optimised light distribution: illumination is circular, rectangular, linear, x-shaped, asymmetric narrow or asymmetric wide

Especially suitable for glare-free lighting installations such as:

• marshalling yards and shipping routes
• crossing areas of multi-lane roads
• parking lots